|
Building axiom from source fails on my Fedora Core 3 system at the
following:
36 making /home/cfm/spad/axiom/mnt/fedora3/doc/src/boot/typrops.boot.dvi from /home/cfm/spad/axiom/src/boot/typrops.boot.pamphlet
40 making /home/cfm/spad/axiom/mnt/fedora3/doc/src/boot/tytree1.boot.dvi from /home/cfm/spad/axiom/src/boot/tytree1.boot.pamphlet
44 invoking make in /home/cfm/spad/axiom/src/boot with parms:
SYS= fedora3
LSP= /home/cfm/spad/axiom/lsp
PART= cprogs
SPAD= /home/cfm/spad/axiom/mnt/fedora3
SRC= /home/cfm/spad/axiom/src
INT= /home/cfm/spad/axiom/int
OBJ= /home/cfm/spad/axiom/obj
MNT= /home/cfm/spad/axiom/mnt
make[3]: *** [/home/cfm/spad/axiom/obj/fedora3/bin/bootsys] Error 255
make[3]: Leaving directory `/home/cfm/spad/axiom/src/boot'
make[2]: *** [bootdir] Error 2
make[2]: Leaving directory `/home/cfm/spad/axiom/src'
make[1]: *** [srcdir] Error 2
make[1]: Leaving directory `/home/cfm/spad/axiom'
make: *** [all] Error 2
cfm@cfm-pclap ~/spad/axiom %
Not very informative to me.
It seems to have finished building gcl. Since there is a binary
for FC3, someone must have built it successfully.
Chuck Miller <c.miller@ms.unimelb.edu.au>
------------------------------------------------------------
GCLOPT setting? --Sun, 20 Mar 2005 21:42:55 -0600
Chuck,
There is a variable in the Makefile.fedora3 called GCLOPTS. It should read:
GCLOPTS="--enable-vssize=65536*2 --enable-locbfd --disable-dynsysbfd \
--disable-statsysbfd --enable-maxpage=128*1024"
Please check this and let me know the result.
Tim Daly <daly@axiom-developer.org>
... --unknown, Tue, 29 Mar 2005 13:04:01 -0600
It seems to work if you use 'setarch i386 -X make' instead of just make.
Looks like the execstack problem again. Until gcl is fixed, there seems
to be no other way around.
Gerard Milmeister <gemi@bluewin.ch>
... --unknown, Wed, 16 Nov 2005 08:20:44 -0600
with September source I have the same problem (still on FC3)
I try to use 'setarch i386 -X make' in vain!
[#127 Building axiom from source fails on my Fedora Core 3] --root, Wed, 16 Nov 2005 10:03:09 -0600
===================================================================
FAQ 36: Axiom won't build on FC3
===================================================================
You need to turn off dynamic library load point randomization.
As root do:
echo 0 >/proc/sys/kernel/exec-shield
===================================================================
FAQ 37: Axiom won't build on FC4
===================================================================
You need to turn off dynamic library load point randomization.
As root do:
echo 0 >/proc/sys/kernel/randomize_va_space
or do
setarch i386 -R make axiom
FC3 --unknown, Sat, 28 Jan 2006 10:49:53 -0600
Tried the echo 0>.....
It didn't help; perhaps I need to reboot?
The setarch ...-X make also failed.
I can make a batch file that's to prove the above if needed, but it's the randomized sbrk still failed.
Resolution fedora fc3 --rrogers, Fri, 03 Feb 2006 13:46:36 -0600
As I mentioned elsewhere
Kerenl 2.6.12 ... would not build even with echo... or setarch
Kernel 2.6.11-1.35_FC3 allowed a build without any fixes
[#127 Building axiom from source fails on my Fedora Core 3]
Resolution fedora fc3 --root, Fri, 03 Feb 2006 17:25:17 -0600
Roy,
Can you post the console trace of the failing axiom build
from the 'make' until the failure?
I can't imagine why there is a kernel issue except that
perhaps one has SELinux enabled by default and the other
does not.
Tim
Building axiom from source fails on my --rrogers, Fri, 03 Feb 2006 17:31:41 -0600
Sure I will do it tomorrow, but it's the old sbrk thing that wouldn't cler with the other kernel.
Ray
Building axiom fc3 etc... compile listings. --rrogers, Sat, 04 Feb 2006 16:33:46 -0600
Tim,
You will the make outputs at http://www.plaidheron.com/ray/temp
together with the batch file used to generate them.
BTW: My browser crashes on some searchs, and the listing indicates some errors together with missing NAG files. Should I try to fix the errors?
Ray
[#127 Building axiom from source fails on my Fedora Core 3] Building
axiom fc3 etc... compile listings. --root, Sat, 04 Feb 2006 23:16:16 -0600
Ray,
If you can find the cause of the hyperdoc crashes that would be most
useful.
Tim
previous hyperdoc bug reports --Bill Page, Sun, 05 Feb 2006 12:35:50 -0600
See #153 #168 #236
Note in particular solution to the libdb.text problem in #153
Building axiom fc3 -- Browser --rrogers, Sun, 05 Feb 2006 13:49:54 -0600
This is fun?
I found solution #153 on my own (should have looked here first).
BTW: you have several old libdb.text floating around that don't get undated; and confuse the issue.
int/algebra has the right time stamp
Strangness: after I did the copy, browse barfed on the libdb.text lines having dInteger
For instance Brose-> Integer->Documentation
Looking around I did cut and pastes for those lines (which is how I reached the conclusion)
Upon pasting the lines back they seemed to work??
---
and of course there is another problem...
Sometimes hyperdoc (?) complains and dies "NIL is not of type STREAM."
For instance: Browse -> Integer -> Operations
Ah well, I looked through the FAQ but found nothing. Perhaps I will poke around some more.
# --unknown, Sat, 01 Jul 2006 23:28:00 -0500
Category: building Axiom from source => Reduce
Severity: serious => wishlist
Status: open => not reproducible
property change --greg, Sun, 02 Jul 2006 09:23:55 -0500
Category: Reduce => building Axiom from source
Severity: wishlist => serious
Status: not reproducible => open
Is it fixed ? --greg, Sun, 02 Jul 2006 09:25:02 -0500
... --gdr, Wed, 15 Oct 2008 21:59:20 -0700
Severity: serious => minor
Status: open => need more info
I would think that FC3 is no longer a mainstream
supported OS; so how important is this report.
Also, I think that this problem has been
solved in all systems based on axiom.build-improvements, e.g.
OpenAxiom and FriCAS.
|